| Model | P70 | P70G | P80 | P80G | P90 | P90G | P100 | P100G |
|---|
External dimensions
W-H-D
(mm) | 340 - 380 - 490 | 380 - 380 - 490 | 380 - 450 - 540 | 420 - 450 - 540 | 490 - 510 - 600 | 530 - 510 - 600 | 655 - 770 - 910 | 695 - 770 - 910 |
|---|
Chamber dimensions
W-H-D
(mm) | 120- 90-220 | 170-150-260 | 240-210-295 | 350-300-500 |
|---|
| Chamber capacity | 2.4 L | 6.6 L | 14.9 L | 52.5 L |
|---|
| Weight | approx. 20.5kg | approx. 21.5kg | approx. 26.5kg | approx. 27.5kg | approx. 39.0kg | approx. 40.0kg | approx. 124.0kg | approx. 125.0kg |
|---|
| Power requirement | AC100V 50/60Hz | AC200V Single phase 50/60Hz |
|---|
| Power consumption | 1.4kW | 3.0kW | 4.0kW | 8.0kW |
|---|
Ordinary/Max.
temp. | 1050ºC / 1150ºC | 1000ºC/1100ºC |
|---|
| Temp. range | 100ºC - 1150ºC | 100ºC - 1100ºC |
|---|
| Temp. control unit of measure | 0.5ºC |
|---|
| Temp. distribution range | ±3ºC at 1000ºC |
|---|
| Muffle wall material | Ceramic fiber |
|---|
| Thermo-couple | JIS - K type |
|---|
| Heating element material | Alloys of Fe, Cr and Al | Kanthal heating element |
|---|
| Exhaust hole diameter | φ23 |
|---|
| Safety devices | Cooling fan , Over-current breaker, over-heat temp. set device, rear cover sensor,
Micro-computer malfunction detector ( computer failure, heater breakdown, abnormal heat-up, memory failure ) |
|---|
Max. temp.
up time | approx.45min. up to 1050ºC/approx. 60 min. up to 1150ºC | approx.15min. up to 1050ºC/approx. 18 min. up to 1150ºC | approx.22min. up to 1050ºC/approx.bout 30 min. up to 1150ºC | approx.33min. up to 1000ºC/approx. 42 min. up to 1100ºC |
|---|
| Gas injection unit | Optional | standard mounting
(Nitrogen 2L/min) | Optional | standard mounting
(Nitrogen 2L/min) | Optional | standard mounting
(Nitrogen 5L/min) | Optional | standard mounting
(Nitrogen 20L/min) |
|---|
| Control method | time-sharing P.I.D. control (with auto tuner), P.I.D. constant ... one kind per each pattern |
|---|
| Program stages | 40 patterns / 20 segments per pattern |
|---|
| Pattern links | 10 kinds of any 20 patterns ( 400 segments max.) |
|---|
| Program item | Temp. up and down time, Temp. set, P.I.D. control combination,
Soak stop, Gas flaw command, 3 programmable outputs |
|---|
| Segment input item | 0 - 99 hours and 59 min. |
|---|
| Communication rate | 1200, 2400, 4800, 9600 bps |
|---|
| External terminal | Thermo-couple terminal for recorder, AC power output terminal for gas injection,
Terminal for deodorizer connection, Operation/Stop/Connection output for alarm, 3 kinds of event outputs,
Terminal for selection of power failure recovery, Terminal for RS-232C communication. |
|---|
| Chamber atmosphere | Air | Nitrogen, oxygen, Argon, etc. | Air | Nitrogen, oxygen, Argon, etc. | Air | Nitrogen, oxygen, Argon, etc. | Air | Nitrogen, oxygen, Argon, etc. |
|---|
| Accessories | Ceramic plate, Blank plug for exhaust outlet, AC power code ( attached in case 70 series model ),
Gas injection unit ( G type only ), Instruction manual,
Communication software for sample, User's card. |
|---|
| Optionals |
|---|
| Applied Model | P70 | P70G | P80 | P80G | P90 | P90G | P100 | P100G |
|---|
| Gas injection unit | ES7S / ES71S | ES72S |
|---|
| Deodorizer | VF71S | VF72S |
|---|
| Gas injection unit | KDG-70 | Built-in | KDG-80 | Built-in | KDG-90 | Built-in | KDG-100 | Built-in |
|---|
| Exclusive stand | KDW-100 / KDW-200 | KDW-200 |
|---|
| Software for communication | KDM-232 |
|---|