產品[
標準型G-10DA
]資料
如果您對該產品感興趣的話,可以
產品名稱:
標準型G-10DA
產品型號:
G-10DA
產品展商:
日本ULVAC
產品文檔:
無相關文檔
簡單介紹
G-10DA
標準型G-10DA的詳細介紹
Direct Drive Oil-SealedRotaryVacuumPumps G-10DA |
Two-stage / with cord, plug, and switch |
 | | | ULVACKIKO's Direct-Drive Oil-Sealed Rotary Vacuum Pumps aretheslidingvane "Gaede Type". Oil is used to lubricate therotarymechanismand to seal the vacuum pumping chamber,producingexcellent vacuumstability and reliability. Smalldirect-drive pumpsfeature fasterstart-up and quicker pump downcompared tobelt-driven pumps. Inaddition, ULVAC KIKO 's G-SeriesOil-SealedRotary Vacuum Pumps arecost-effective and operatequietly.
G-Series pumps are available in single and dual stageversionswithpumping speeds ranging from 5 L/min.to100L/min.. |
|
 Specifications |
| | Unit | 50Hz | 60Hz | | ActualPumpingSpeed | L/min. | 10 | 12 | | Ultimate pressure | Pa | 1.3 | | Motor | | Single phase,220V,60W,4 poles,capacitor run | | Full load current | A | 0.52 | 0.56 | | Oil capacity | mL | 250 | | Recommended oil | | SMR-100 | | Weight | kg | 5.5 | | Inlet, outlet pipe diameter | mm | O.D. dia.18 x I.D.dia.14 | | Ambient operation temp.range | °C | 7 – 40 | | Dimensions | mm | 130(W) x 228(L) x 165(H) |
|
| Caution |
| 1. | Ensuretheproper oil level and oil condition are maintainedatalltimes. | | 2. | Beforestopping a pump it should be vented to atmospheretoprevent theback-streaming of oil. (Contact your localsalesrepresentative forapplications assistance.) | | 3. | Whenoperating a pump for long time above 0.1MPa, it ispossiblethatoil mist be exhausted from the exhaust port.Installation ofOilmist trap (OMT Series) will eliminate thispotential sourceofcontamination. | | 4. | Oil-sealedrotary pump is not recommended forcontinuousoperation nearatmospheric pressure. |
| Outlinedrawing |
| Pumping SpeedCurves |
| Option |
Optionalsuctionport
| Size | Note | | Suctionpipeforhose | Dia.12 | Attachedtostandardtype | | Suctionpipeforhose | Dia.8 | Option | | Suctionpipeforhose | Dia.15 | Option | | Suctionpipeforhose | Dia.18 | Option | | Suctionpipeforhose | Dia.22 | Option | | KF-25 suctionport | KF-25XM20 | Option | | A typesuctionpipe | PT1/4-L20,male | Option | | B typesuctionpipe | PT1/4-L20,female | Option | | C typesuctionpipe | PT1/4-L10,male | Option | | Suctionpipewithfilter | Dia.9 | Option |
|
Optional exhaust port
| Size | Note | | Exhaust port cap | - | Attachedtostandardtype | | Exhaustpipeforhose | Dia.12 | Option | | Exhaustpipeforhose | Dia.15 | Option | | Exhaustpipeforhose | Dia.18 | Option | | KF-16 exhaustport | KF-16 | Option | | KF-25 exhaustport | KF-25 | Option |
|
Trap for exhaust side
| Model | Note | | Oil-mist trap | OMT-050A | Option |
|
 Optionalvoltage |
| Voltage | Applicable Volt | CE Marked | CSA Marked | cTUVusMarked | | Singlephase,100V | Standard | | | | | Singlephase,110V(60Hz) |  | | | | | Singlephase,115V(60Hz) | | | | | | Singlephase,120V(60Hz) |  | | | | | Singlephase,200V | | | | | | Singlephase,230V(50Hz) | | | | | | Singlephase,240V | | | | |
|